P0225

P0225 OBD Code Definition:
P0225 Throttle Pedal Position Sensor/Switch C Circuit
P0225 OBD Code Description:

OBD Code P0225

Throttle/Pedal Position Sensor/Switch “C” Circuit

What’s mean?

OBD2 Code P0225 Definition:
Electric Throttle Control Actuator consists of throttle control motor, throttle position (TP)sensor, etc. The throttle position sensor responds to the throttle valve movement. The throttle position sensor has the two sensors. These sensors are a kind of potentiometers which transform the throttle valve position into output voltage, and emit the voltage signal to the ECM. In addition, these sensors detect the opening and closing speed of the throttle valve and feed the voltage signals to the ECM. The ECM judges the current opening angle of the throttle valve from these signals and the ECM controls the throttle control motor to make the throttle valve opening angle properly in response to driving condition.

Symptoms

Possible sumptoms of P0225
– Engine Light ON (or Service Engine Soon Warning Light) – No throttle response

Possible Causes

Possible causes of P0225
– Harness or connector (The TP sensor circuit is open or shorted.) – Electric Throttle Control Actuator (or Throttle Body Motor) – Accelerator Pedal Position Sensor (APP) The Error code is generally activated on detection of the following conditions: An unexpected voltage from the TP sensor is sent to ECM.

Possible Solutions

2 thoughts on “P0225

Leave a Reply

Your email address will not be published.