P0402

P0402 OBD Code Definition:
P0402 Exhaust Gas Recirculation Flow Excessive Detected
P0402 OBD Code Description:

OBD Code P0402

Exhaust Gas Recirculation Flow Excessive Detected

What’s mean?

OBD2 Code P0402 Definition:
EGR stands for Exhaust Gas Recirculation. It is part of the vehicle emmissions system, and is used to reduce combustion temperature and pressure to control Oxides of Nitrogen. There are generally three parts to the EGR system: the EGR valve, an actuator solenoid, and a differential pressure sensor (DPF). These things work together to deliver the correct amount of recirculation based on engine temperature, load, etc. The P0402 code means that OBD detected an excessive amount of EGR.

Symptoms

Possible sumptoms of P0402
You may notice drivability problems such as the engine may surge off idle. There may also be other symptoms.

Possible Causes

Possible causes of P0402
A code P0402 most likely means one or more of the following has happened: The DPFE (differential pressure) sensor is faulty and needs to be replaced There is a blockage in the EGR (most likely carbon buildup) The EGR valve is faulty The EGR valve may not be opening due to a lack of vaccuum

Possible Solutions

With a P0402, it is common for people to replace the EGR valve, only to have the problem return. The most likely solution is to replace the DPFE sensor. Check the voltage at the DPFE sensor both at idle and when the EGR is open Replace the DPFE sensor

OBD-II Codes

P0400 P0401 P0403

Leave a Reply

Your email address will not be published.