B0014

B0014 OBD Code Definition:
B0014 Left Side Deployment Loop
B0014 OBD Code Description:

Possible causes
– Faulty Left Side Impact Module
– Faulty Sensing and Diagnostic Module (SDM)
Symptoms
– Air Bag Warning Light ON
B0014 OBD Code Description

During a side or frontal crash of sufficient force the inflatable restraint Sensing and Diagnostic Module (SDM) will allow current flow through the deployment loop in order to deploy the side impact module. A shorting bar is located in the electrical connector of the side impact module. The side impact module high control circuit and low control circuit are shorted together by the shorting bar when the electrical connector is disconnect. The shorting bar help prevent unwanted deployment of the inflator module during servicing.

The SDM performs continuous diagnostic test on the deployment loops to check for proper circuit continuity and for shorts to ground or voltage. If the results of any deployment loop circuit test is below specifications the code B0014 and the appropriate symptom byte will set.

Leave a Reply

Your email address will not be published.